RHINO M10p
At a glance
Android 10
Android 11 (2022)
4GB RAM
32GB Storage
Global LTE
EMM validated
Getting started
Doc | Description | |
---|---|---|
Quickstart | Get started with your device quickly | |
Seiko CAPM347 datasheet | Detailed overview of the CAPM347 printer |
Device spec
Display | 10.1" |
149.45 PPI | |
G+G | |
Contrast typically 600/800 | |
Brightness up to 200/250 cd m2 | |
1280 x 800 resolution | |
Viewing angles 85°/85°(v/h) | |
16.7m colours | |
16:10 aspect ratio | |
60Hz refresh rate | |
30/35ms response time | |
10 touch points | |
Memory & storage | 4GB LPDDR4 |
32GB eMMC 5.1 | |
Processor | MediaTek Genio 500 Octacore 2.0GHz |
SIM | Standard SIM/eSIM |
Ports | SIM |
MicroSD up to 256GB | |
USB Type C, USB 2.0 (x3) | |
3.5mm jack | |
RJ11 Port | |
RJ45 Port | |
RS232 Port | |
24v PSU Socket | |
Printer | Seiko CAPM347 |
Thermal line dot printing | |
300mm/sec print speed | |
54, 56, 72, 80mm print width | |
Auto-cut | |
Audio | Stereo mic array |
Stereo speakers | |
Wake word support | |
Connectivity | LTE Cat 4 |
2G: 2 3 5 8 | |
3G: 1 2 4 5 8 | |
4G: 2 3 4 5 7 12 17 20 25 26 30 41 66 71 | |
Wi-Fi 802.11 a/b/g/n/ac | |
Bluetooth V 5.0 | |
Location: GPS, GLONASS, BeiDou, Galileo | |
Camera | 5M FF F2.2 4P lens (AR/OV) |
Sensors | Gyroscope |
Ambient light sensor | |
Environmental | Functional up to 95% humidity |
-10c to 55c typical operating temp | |
Unboxed:L:228.60mm x W:248.92mm x H:190.5mm | |
Boxed:L:273.05mm x W:298.45mm x H:247.65mm | |
IP2X | |
Certifications | FCC |
CE | |
CEC | |
DOE | |
PRO65 | |
ROHS | |
REACH | |
WEEE | |
UL (power adapter only) |
Product lifecycle
For product support and lifecycle status, please see the security page.
Warranty information
All RHINO hardware comes with a 1 year limited warranty. For detailed warranty information, please see RHINO Warranty.
Product support
General
- Why does my RHINO power off during the set up Wizard?
- Factory reset your RHINO device
- Locate the IMEI & serial of your RHINO device
- How to check for updates
- Why does it take a long time for the M10p to power on?
- How to use Bluetooth on your RHINO device
- View and manage installed applications
- How to use Wi-Fi on your RHINO device
- How to power on your RHINO device
- RHINO preloaded applications
- How to reboot your RHINO device
- Reset network settings
- How to view the RHINO privacy policy
- View software information
Advanced
- Remove an application from Battery Optimisation
- Boot a RHINO device into recovery
- Device admin & Android Enterprise
- Enable USB debugging & collect a bug report
- How to unlock the bootloader
- Manage APN settings
- How to recover RHINO booting to factory mode
- Set up ADB for debugging
- Update RHINO software via ADB
- Update RHINO software via SD card
- What is a Full OTA?